HammerHead™ is an adapter for PushKnife™. When HammerHead™ is installed onto the end of PushKnife™, it acts as a receiving area for a rubber mallet to strike, enabling power from the blow to be transferred to the cutting area and through the urethane.
A safer alternative to steel auto glass cutting wire.
Engineered and developed to provide durability, strength, performance, and safety to enhance the cutting results of any auto glass wire cutting system...The RipCord™ is a state of the art material designed to completely eliminate auto body scratching that occurs when using standard steel or braided wire. In conjunction with its anti-scratch quality, RipCord™ has an abrasion resistant technology that offers the auto glass industry its first reusable auto glass removal line.
RipCord™ features a “no load under stress” reaction to line breakage. If the line breaks, it will not retract, spin or coil the way steel and braided wires do. This keeps the technician safe from potential injury.
RipCord™ is packaged in 300 ft. spools. Each length of RipCord™ that the technician uses for cut out is reusable, extending the life of the spool. This new material will perform well with any existing auto glass wire cutting system available on the market today.
No tools needed to change a blade This is the same great tool as the Fein® SuperCut, but with the ability to change the blade without tools. Pull the blade retaining lever up and push it forward 180° and the blade retainer drops out of the tool, drop on a new blade, reverse the process and you are ready to continue cutting with a different blade.
Includes 1-Fein® QuickIN, 1-FTB20728 Blade Starter Kit (consists of one each of the: 3/4", 1" and 1-1/2" L-Shaped Serrated Blades) and a DVD users guide. Everything comes neatly packaged in a plastic carrying case.
Fein® tools were introduced into the auto glass industry in the early 1980s and remain one of the most used auto glass removal tools in the world. Fein® has worked to refine their original design and today the Fein® SuperCut has a streamlined design, high-power motor, and a variable speed control. The tool is of the highest quality and uses ball and needle bearings together with a gearbox designed for continuous use and heavy loads.
Each FSC17 kit includes 1-Fein® SuperCut, 1-FTB20728 Blade Starter Kit (consists of one each of the 3/4", 1" and 1-1/2" L-Shaped Serrated Blades), one blade tool, and a DVD users guide. Everything comes neatly packaged in a plastic carrying case.
To get the best performance, it is important to put a good edge on the blade every time you use your auto glass cut-out knife. Since you do not always have access to a bench grinder, this sharpener will do that quick touch up that brings the blade back to a razor-sharp edge. You can sharpen the blade in about 10 seconds by dragging the sharpener across the blade 3 or 4 times. All off-the-shelf sharpeners will put a V-type edge on the blade and this type of sharpening can prevent the tool from working properly. Our Express® Blade Sharpener puts the chisel-type edge on the blade and keeps your auto glass cut-out knife operating at peak performance. It also features a built-in protector to keep you from cutting your hand on the blade.