Black-Ops™ Blades

sort by:
  • 1
  • 2
view:

Express® Blade • 3" X 10"

IP BFE1400

$42.00

Equalizer® Express® Blades are developed for use on hundreds of different vehicles.

The BFE1400 is the most used size and is perfect for slicing through wide bands of urethane.  It works well in all plcaes where you need to plunge cut or angle cut.

This blade can also be used with our Express® Blade Handle or PushKnife.

Made of a proprietary grade of stainless steel.

Made in the USA.

Express® Blade • 1.5" X 10"

IP BFE1401

$42.00

Equalizer® Express® Blades are developed for use on hundreds of different vehicles.

The BFE1401 is the most widely used size and is perfect for slicing through wide bands of urethane. It works well in all areas where plunge cut or angle cut are used.

This blade can also be used with our Express® Blade Handle or PushKnife.

Made of a proprietary grade of stainless steel.

Made in the USA.

Standard HydroBlade™ • 1-1/2" x 10"

IP EHB145

$42.00

Equalizer® HydroBlades™ have a series of small dimples stamped on the side of the blade that rides against the urethane. These dimples are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane allowing for each additional stroke of the blade to slide easily through the urethane. Besides making the blade cut easier they also save battery life and reduce vibration because of the reduced friction on the blade.

Made of a proprietary grade of stainless steel.

Made in the USA.

 

Standard Hydroblade™ • 3" X 10"

IP EHB186

$42.00

Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.

The cutting lubricant allows for each additional stroke of the blade to slide easily through the urethane. The blades are made of stainless steel and have a series of small dimples stamped on the side of the blade that rides against the urethane. Besides making the blade cut easier they also save battery life and reduce vibration because of the reduced friction on the blade.

Made of a proprietary grade of stainless steel.

Made in the USA.

Standard HydroBlade™ - 3" x 14"

IP EHE160

$42.00

Equalizer® HydroBlades™ have a series of small dimples stamped on the side of the blade that rides against the urethane. These dimples are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane allowing for each additional stroke of the blade to slide easily through the urethane. Besides, make the blade cut easier they also save battery life and reduce vibration because of the reduced friction on the blade.

Made of a proprietary grade of stainless steel.

Made in the USA.

Express® Specialty HydroBlade™ • 10"

IP EHF173

$42.00

Now Serrated For An Even Better Cut!

Some areas require side-to-side cutting. This is more common around very radical curves in the glass, and in vehicles that have corners with a sharper-than-90° angle. It can be difficult to get all the way up into these corners with a square-end blade, but with the round tip it will reach up into the corner and cut the urethane. This blades can also be used with our Express Blade Handle.

Made of a proprietary grade of stainless steel.

Made in the USA.

Standard HydroBlade™ • 1-1/2" x 12"

IP EHL146

$42.00

Equalizer® HydroBlades™ have a series of small dimples stamped on the side of the blade that rides against the urethane. These dimples are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane allowing for each additional stroke of the blade to slide easily through the urethane. Besides making the blade cut easier they also save battery life and reduce vibration because of the reduced friction on the blade.

Made of a proprietary grade of stainless steel.

Made in the USA.

Standard Hydroblade™ • 3" X 12"

IP EHL187

$42.00

Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.

The cutting lubricant allows for each additional stroke of the blade to slide easily through the urethane

The blades are made of stainless steel and have a series of small dimples stamped on the side of the blade that rides against the urethane. Besides making the blade cut easier they also save battery life and reduce vibration because of the reduced friction on the blade.

Made of a proprietary grade of stainless steel.

Made in the USA.

Spacer HydroBlade™

IP EHS174

$48.00

Some vehicles have a molding with a piece of metal inside. Moldings with metal inserts can be difficult to cut, but by using the Spacer HydroBlade™ cutting these is a breeze. Also, many encapsulated glasses have a very dense encapsulation material that is difficult to cut. To save unbroken glass these blades are designed to hold the blade below the molding and prevent the blade from cutting into the encapsulation. A permanently attached, self-lubricating nylon spacer lets the blade move easily back and forth while holding the blade under the lower lip of the molding or encapsulation.

Made of a proprietary grade of stainless steel.

Made in the USA.

Spacer HydroBlade™

IP EHS175

$48.00

Some vehicles have a molding with a piece of metal inside. Moldings with metal inserts can be difficult to cut, but by using the Equalizer™Spacer HydroBlade™ cutting these is a breeze. Also, many encapsulated glasses have a very dense encapsulation material that is difficult to cut. To save unbroken glass these blades are designed to hold the blade below the molding and prevent the blade from cutting into the encapsulation. A permanently attached, self-lubricating nylon spacer lets the blade move easily back and forth while holding the blade under the lower lip of the molding or encapsulation.

Made of a proprietary grade of stainless steel.

Made in the USA.

Quarter Glass & Corner HydroBlade™ • Passenger Side

IP HQS176

$42.00

Many quarter glasses come to a sharp point in the back and can be difficult to remove. These blades are designed to reach into those difficult areas and cut the urethane with a serration for an even better cut!. They are also very useful for those vehicles that have corners with sharp angles. It can be very challenging to reach into some of those corners to cut the urethane. The blades are very flexible to allow the tool to be held outside the quarter glass opening while cutting inside. Each blade is designed for a specific side of the vehicle.

Made of a proprietary grade of stainless steel.

Made in the USA.

Equalizer® Quarter Glass & Corner HydroBlade™ • Passenger Side

1-3/8" Wide, 12" Long • Passenger Side

Quarter Glass & Corner HydroBlade™ • Driver Side

IP HQS177

$42.00

Many quarter glasses come to a sharp point in the back and can be difficult to remove. These blades are designed to reach into those difficult areas and cut the urethane with a serration for an even better cut!. They are also very useful for those vehicles that have corners with sharp angles. It can be very challenging to reach into some of those corners to cut the urethane. The blades are very flexible to allow the tool to be held outside the quarter glass opening while cutting inside. Each blade is designed for a specific side of the vehicle.

Made of a proprietary grade of stainless steel.

Made in the USA.

Equalizer® Quarter Glass & Corner HydroBlade™ • Driver Side

1-3/8" Wide, 12" Long • Driver Side

Wide Quarter Glass & Corner HydroBlade™ • Passenger Side

IP HQW178

$42.00

Now Serrated For An Even Better Cut!

These blades are the same as our HQS176 and HQS177 but are wider to accommodate the quarter glasses and corners that are not as pointed. The blades are very flexible to allow the tool to be held outside the quarter glass opening while cutting inside. Each blade is designed for a specific side of the vehicle. Made of a proprietary grade of stainless steel.

Made in the USA.

Equalizer® 2" Wide, 12" Long • Passenger Side

Wide Quarter Glass & Corner HydroBlade™ • Driver Side

IP HQW179

$42.00

Now Serrated For An Even Better Cut!

These blades are the same as our HQS176 and HQS177 but are wider to accommodate the quarter glasses and corners that are not as pointed. The blades are very flexible to allow the tool to be held outside the quarter glass opening while cutting inside. Each blade is designed for a specific side of the vehicle. Made of a proprietary grade of stainless steel.

Made in the USA.

Equalizer® 2" Wide, 12" Long • Drivers Side

 

Express® Blade • 3" X 12"

IP LBE1402

$42.00

Equalizer® Express® Blades are developed for use on hundreds of different vehicles.

The LBE1402 work well where the urethane is far below the glass, but there is a limited amount of vertical space inside the vehicle.

This blade can also be used with our Express® Blade Handle or PushKnife.

Made of a proprietary grade of stainless steel.

Made in the USA.

  • 1
  • 2