Preparation

sort by:
view:

Razor Blades

IP BFC81

$5.00

Specializer razor-sharp blades for Nozzle Cutter (NCT308).

Package of five.

Made in Germany.

T-slotted Urethane Knife Blades

IP ABT836

$8.00

T-slotted blades allow you to quickly exchange blades by pulling forward and down on a blade. To put in a new blade, push it into the lower part of the knife, push it up into the locking pins, and then push it backward. This motion locks the blade securely in place until you need to replace it again.

For use in the Equalizer® Samurai. 

Package of 10

Small Groove Blade For The U-Groove Cut Out Knife

IP UCS321

$3.00

Cuts a groove for Christmas tree moldings. any technicians use the shortcut method of auto glass installation. When you use this method the bed of urethane remains on the body. When the Christmas tree molding is removed it is impossible to press it back into place. Our U-groove tool solves this problem by cutting a U-shaped groove for the Christmas tree molding to fit into. Two different width blades let you cut narrow or wide grooves. Available with or without a pull handle. Comes with two blades, one small and one large.

Made in the USA.

Large Groove Blade For The U-Groove Cut Out Knife

IP UCL322

$3.00

Cuts a groove for Christmas tree moldings. any technicians use the shortcut method of auto glass installation. When you use this method the bed of urethane remains on the body. When the Christmas tree molding is removed it is impossible to press it back into place. Our U-groove tool solves this problem by cutting a U-shaped groove for the Christmas tree molding to fit into. Two different width blades let you cut narrow or wide grooves. Available with or without a pull handle. Comes with two blades, one small and one large.

Made in the USA.

SuperScraper™ Kit

IP SK345

$30.00

SuperScraper has a lightweight aluminum shaft with a quick-change collet that lets you exchange blades in seconds.

It measures 10" long and blade storage in the handle for extra 1/2" blades.

Kit includes one of each; SuperScraper, SC301 (five 1/2" blades), NT467 ( ten of 5/8" blades), and MZT468 (ten of 3/4" blades). 

Metal Cleaning PrepSticks

IP MCP257

$30.00

A safe and simple, no mess solution for neutralizing leftover rust particles and etching metal for better primer adhesion. Once an individual tube is opened it must be used as it cannot be resealed for later use.

Package of 12.

*Store in a cool, dry place. Not to exceed 120°F. 

Super Scraper™

IP SC300

$12.00

SuperScraper has a lightweight aluminum shaft with a quick-change collet that lets you change the blade in seconds. It measures 10" long and and has extra blade storage in the handle for 1/2" blades. Tool and five 1/2" blades only.

Sanding Prep Pen

IP SP3437

$13.00

For Fine Sanding & Cleaning

Our retractable Sanding Prep Pen goes where other tools or sandpaper can’t reach.

 

Perfect for:

• Scuffing/de-glossing paint in hard to reach areas and near moldings

• Cleaning electrical contacts and connectors

• Cleaning aluminum, screw heads, crevices, and grooves

• Scuffing surfaces prior to using adhesives

• Removing surface rust corrosion without removing the base metal

• Removing rust, wax and road film to prepare paint chips for touch up 


Comes with two sanding cartridges - refill is stored in the handle. Additional refill cartridges (PR3438) are available for purchase.

Pinchweld Cleaning Brushes

IP ABC421

$24.00

Sometimes it is necessary to prime a pinchweld and you will need a small yet inexpensive & high-quality brush. Our Pinchweld Cleaning Brushes are made of horsehair, and have the stiffness needed to spread the primer properly, but are soft enough to spread the primer properly. Made with a thin, metal handle that is 6" long and 5/16" in diameter.
 
Package of 100.

BTB "Winged" Anti-Scratch Pinchweld Preparation

IP WK6SET

$95.00

These blades are sharpened on the outside of the curve and help to avoid damage to paint when removing excess urethane after a windshield removal or removing urethane with shattered tempered glass fragments. 

Set Includes 3-"Winged" blades (1/2", 3/4" and 1"), one 1-9/16" wide prep blade, 1-WK7 handle and 1-hex key.  

Wide Pinchweld Preparation Tool

IP SC170

$13.00

This durable tool trims urethane with ease from the pinchweld and glass.

Includes one blade. 

Rust Removal Brush

IP PBS598

$6.00

This little wire brush is perfect for removing light rust from the pinchweld. Sometimes, quickly scrubbing with this steel brush and applying a new E coat will prepare the metal enough. This way the windshield can be installed without the need of a body shop.

This brushes measures only 8” long and features a wooden handle that is 7/16” square. The stainless steel brushes are arranged in 3 rows and measure 1-3/8” long and 3/8” wide.


Equalizer® BLOWHARD™

IP NPD221

$157.00

To have a successful installation you must start with a dry vehicle. No matter if it is snow or rain, you can dry that vehicle quickly with our Equalizer® BLOWHARD™. It has a 1.3 HP, 120 Volt 8 amp motor that produces an incredible 18,000 ft./min airflow. Get a good grip on the handle because when you flip the switch it has so much force it can jump right out of your hand. The exiting air is warmed by passing over the fast-moving motor so there are no heating elements to burn out. The air gets warm, but never hot enough for you to worry about scorching the paint. It’s small and compact so it doesn’t take up a lot of space in your mobile van and designed to run on an inverter so you can power it anywhere. It comes with one high-pressure nozzle for getting down into difficult areas and one wide angle nozzle for drying larger areas.

Utility Knife Blades • 100

IP UKB498

$17.00

Our utility knife blades will fit all standard utility and cutting knives.

Dispenses blades one at a time from a slot in the top and allows you to safely dispose of the blades by putting them in the bottom of the container when they are worn out.

Package of 100.

Pinchweld Cleaner

IP JEB569

$12.00

It is important during every windshield replacement to clean the pinchweld in order for the urethane to adhere properly. Whisk brooms were used in the past for cleaning the pinchweld but with today’s vehicle paint jobs being up to seven layers thick with a clear coat, the stiff straws would scratch the surrounding painted surfaces. Instead, now days you’ll see technicians using paint brushes for this task. We wouldn’t recommend using just any paint brush though because many of them still have bristles that are stiff enough to damage the clear coat. Our Pinchweld Cleaner brush was designed specifically with this job in mind. It is a paint brush made with soft “crushed” bristles for contact with the paint, but enough stiffness in each individual bristle to remove the dust and dirt out of the pinchweld.