Finally, somebody made a measuring tape that is easy to read! How many times have you counted the little marks to see if it was 3/8" or 7/16"?
The fractional measuring tape has every 1/8" marked so if it is between 3/8" and 1/2" it is 7/16". It has a locking hold function, is constructed with a polymer-coated blade for a long life, and has a durable, textured case for a non-slip grip.
The external shell of this toolbox is made of heavy-duty molded high-impact polypropylene colored resin. It has a large storage area on top and three durable steel drawers with full-extension slides that lock when lid the lid is closed. One great feature that most toolboxes do not have is the “front foot” design that stabilizes the box when the drawers are opened. It has a large, comfortable center handle and molded-in depressions in cover for holding small parts. Features locks for total security.
•This item is oversized and will have extra shipping charges
Sometimes a little “gentle persuasion” with a rubber hammer is the only way you can make an item fit. Most rubber hammers are actually quite hard and can easily damage a vehicle. Our hammer is made of Sorbothane®, a viscoelastic polymer, that is less likely to damage the vehicle. So soft you can take the rubber part between your thumb and forefinger and compress it.
Simply unfold this stepladder, hook it over the wheel of the vehicle, and step up to work on the windshield. It gives you a 12" to 20" boost depending on tire size. Rugged 1" tubular steel easily supports up to 200 pounds. The 22" wide, non-slip safety-surface gives positive traction.
This kit has been redesigned and improved since first introduced in 1975 and is in use in hundreds of shops throughout the country. Lock Out Kit can open most of the vehicles in the market and includes a 50-page how-to manual that is full of tips and tricks for lockout situations. Lock Out Kit includes slide lock button tool, dual release tool, narrow release bar, wide release bar, Japanese tool, wonder tool, knob grabber, gas cap key, nylon wedge, and a 50-page instruction manual.
FlexLight has a 9" flexible shaft that stays bent in any position so you can shine light where it is needed. The FlexLight can be used to find lost screws under seats or hoods. The bendable shaft lets you light up anywhere inside the door. Use a nylon wedge to pry the door out slightly, then shine the light inside to see the mechanism you want to work on. It may be one of the handiest tools you own.
On many older vehicles, it is common to find the hood holder damaged or missing. Body shops are notorious for leaving these off until the vehicle is completely repaired. When this happens you must find a way to hold the hood up while you remove and replace the cowling. It is at this precise minute that you cannot find a broom, mop, tree limb or anything else to hold the hood up! Put one of these expanding hood holders in your toolbox and you will never have the problem of holding the hood up again. Collapses to 20" in length and will expand up to 47" long.
Over a period of time, the gas lifters that hold up the hood or rear hatch on a vehicle can fail. This small, easy-to-use device solves this problem. Open the hood or rear hatch, attach the device to the metal rod on the gas cylinder, and secure. It will stay in place until you are finished with the job.
Years ago we gave very little thought to contamination of the glass or pinchweld. We have learned a lot since then, and today we go to great lengths to prevent a glass from leaking and to make sure it bonds properly. Lint seems like a small problem, but some towels leave a large amount on the glass. Every place there is lint is a place that the glass does not bond. There can be thousands of pieces of lint in an area only an inch or so in diameter, but you only see the larger pieces. Our Lint-Free Wipes get rid of all the lint and give you a totally clean surface so your urethane will bond completely. Size 13" x 13".
Install door glasses the easy way with Window Things. Now you can virtually retire your rivet gun and eliminate the possibility of breaking glass during installation. Window Things fit most Ford, Chrysler, and GM products with no need for snap-through, screw-type retainers. Simply snap through holes in the glass, line up channel, and insert the screw.