Best answer: What transmission fluid do I use in a 4l60e?

What Type of Transmission Fluid Does The 4l60e Use? The recommeded transmission fluid for the GM 4l60e is Dexron 3 / Dexron 6 / Dex Merc. Since its release in 1993, Dexron 3 (Dex III) was the recommended transmission fluid for the 4l60e.

How many quarts of transmission fluid does a 4L60E take?

The 4L60e’s fluid volume is 12 quarts (dry) of transmission fluid. This volume is based on a stock, with a 12 “torque converter,” shallow “transmission pan.” The ability of additional fluid will range from an extra quart or more with a deep pan.

What transmission fluid does Chevy recommend?

In the case of all automatic models of the Chevrolet Silverado 1500, it’s crucial to use DEXRON-ViATF automatic transmission fluid. This is what’s recommended by General Motors, as it meets internal specifications that will keep Your transmission running smoothly for years to come.

Does it matter which transmission fluid I use?

Even if you change your transmission fluid, you never will be able to drain all of the fluid from your system so it is important to use the same kind of fluid. It is also important to use the correct type of automatic transmission fluid because different fluids have very different properties.

IT IS INTERESTING:  What is a three cylinder engine?

Can I use dexron 6 instead of ATF 4?

MaxLife® ATF, ATF +4 and DEXRON® VI are all synthetic transmission fluids. Is it OK to mix synthetic ATF with a conventional and/or synthetic blend ATF? Yes. Synthetic ATF and conventional fluids are 100 percent compatible with each other.

Can I use dexron VI instead of dexron II?

Dexron VI replaced Dexron II and III, and can be used in General Motors domestically built or import transmissions that specified Dexron II or Dexron III. Dexron VI is a low viscosity transmission fluid and should also be used with the full synthetic low viscosity transmission fluid.

Can you use dexron III in place of dexron VI?

Direct Replacement

Dexron VI fully replaces Dexron III and prior evolutions of the Dexron fluids. … Dexron VI works in any vehicle that requires ATF-A (the original automatic transmission fluid) or a Dexron variation. GM’s newest vehicles require the use of Dexron VI in the transmissions, however.

Are all dexron fluids compatible?

Yes, DEXRON-VI fluid can be used on any vehicle type that calls for DEXRON transmission fluid.

Is all dexron VI transmission fluid synthetic?

Everest Dexron®-VI Full Synthetic Automatic Transmission Fluid is a licensed and GM® approved, high performance ATF fluid formulated from 100% synthetic base oils and an advanced additive package that meets or exceeds the performance, protection and service requirements of virtually all makes and models of passenger …

What happens if I use the wrong transmission fluid?

Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission. Mistakenly adding motor oil or brake fluid can also destroy your transmission.

IT IS INTERESTING:  How does a wind turbine motor work?

Can you mix old and new transmission fluid?

This fluid starts to lose its standard properties and should be changed to keep the transmission parts and its performance at its peak. Mixing old and news fluids wont give you the ideal viscosity and the reduces the performance of the transmission system.

Is dexron 3 the same as ATF 4?

Dexron IV was an upgraded version of Dexron III, which was used by GM only briefly. … GM considers Dexron VI to be “backward compatible,” meaning GM recommends it for use in any vehicle that originally used any earlier version of Dexron and that it can be mixed with them.

Car repair school