# Best answer: What type of motor has the highest starting torque?

Contents

DC motor has high starting torque.In a series motor the same current flows through the armature and the field winding. The torque is therefore proportional to the square of the current. The current is set by the supply voltage and the back-emf generated in the armature.

## Which motor has the highest starting torque?

Best DC motors for high starting torque?

• Shunt wound DC motors are used in applications where the required starting torque is low, but good speed regulation is important. …
• Series wound DC motors are best for applications that require high startup torque, without the need for speed regulation.

## Which of the following DC motor has highest starting torque?

Explanation: The series motor has the highest starting value of torque even at lower speed. This application makes it practically useful in Traction purposes. Due to this property, it is employed in Forklifts, traction motors and other locomotives.

## What is full load torque?

The full load torque of a motor is the maximum torque that the motor can deliver when it is fully loaded. Here is a simple motor torque calculator that can help you calculate the full load torque of a motor.

## What is low starting torque?

The starting torque of the motor is given by, … At start, the rotor reactance is large because slip of the motor at start is equal to unity. The large rotor reactance at start makes the starting torque of the motor poor. The motor draws about 5 to 6 times current of its full load current and produce very less torque.

## Which type of starter motor generates the highest torque at low rpm?

Excellent torque characteristics at low speeds

Stepper motors have maximum torque at low speeds (less than 2000 rpm), making them suitable for applications that need low speed with high precision.

Which DC motor has got maximum self-loading property? Explanation: A differentially compound DC motor, flux reduces so sharply at small increase in load at higher values of load. It is advisable that motor should not be used beyond some load value, as it may damage itself by self-loading.

## Why do DC motors have more torque?

DC motors can provide a more constant torque over the speed range, and generally provide faster response to load changes that AC motors. Depending on the configuration of the coil connection (series versus parallel), different performance across load value for DC motors can be obtained.

## What is the pull out torque?

: the maximum torque a motor will carry without an abrupt drop in speed.

## How is rated torque calculated?

To calculate load torque, multiply the force (F) by the distance away from the rotational axis, which is the radius of the pulley (r). If the mass of the load (blue box) is 20 Newtons, and the radius of the pulley is 5 cm away, then the required torque for the application is 20 N x 0.05 m = 1 Nm.

IT IS INTERESTING:  What causes a lawnmower engine to rev up and down?

## How much torque does a 1 hp motor have?

The 3600 RPM, 1HP motor produces 1.5 ft. lbs. of torque at 3600 RPM. So if your 1HP pump was operating at 1800 RPM, the 1800 RPM motor would be producing 3 ft.

## What creates torque in a motor?

Engines in mainstream cars and trucks typically generate 100 to 400 lb. -ft of torque. That torque is created by the pistons within an engine as they reciprocate up and down on the engine’s crankshaft, causing it to rotate (or twist), continuously.