Frequent question: Where is the engine model number for Briggs and Stratton?

How Do I Identify a Briggs & Stratton Engine? The Model, Type and Code numbers, stamped directly into the engine, are used to identify our engines. Engines used in lawn mower applications usually have the model numbers stamped directly into the blower housing, muffler heat shield, or a few inches above the spark plug.

Where do I find my engine model number?

To find the model number, look for a model number sticker on the engine. The engine type code is stamped into the side of the engine, usually close to the serial number. Engine type codes may be up to 4 characters.

How do I tell what year my Briggs and Stratton engine is?

How can I determine the age of my engine if it was made after 1965?

  1. The first two digits (99) denote the year of manufacture. …
  2. The next two digits (01) are the month of the year, which is January.
  3. The following two digits (15) are the day of the month. …
  4. The final two digits designate the plant and assembly line.

How do you read engine serial numbers?

Your serial number is located on your engine plate, often located on the left-hand side of the engine. Typically the first letters and numbers will identify the engine, for example, DJ51279, to find all the parts we have online for your engine.

IT IS INTERESTING:  Your question: Does the 2015 Toyota Corolla have a CVT transmission?

How do I find out my engine model?

Find it in the lower corner of your windshield on the driver’s side. Your VIN number is your vehicle identification number and you can find your engine size by VIN number. In the series of numbers and letters, the tenth from the left denotes the model year and the eighth is the engine codes.

What do the numbers on a Briggs and Stratton engine mean?

The number model system consists of three series of numbers. The first number you find will be the model number, the second number is the engine type and the third number is the code number. The engine’s code number indicates the exact date it was manufactured.

How do I find the carburetor on my small engine?

You’re going to be looking for body type and the model number on opposite sides of the body. You’ll find the body type on the same side as the jets, usually cast into the center of the housing. In this case, our carburetor has a “C1U” body. For the model number, you’ll simply turn it around to the opposite side.

Where is the date code on a Briggs & Stratton engine?

The code is stamped directly into the metal of a Briggs & Stratton engine. Collectors of antique engines often jump past the model and type numbers to read the date code first. Wipe any grease and grime away from the code stamp with a cloth or moist towelette. Use a magnifying glass to see the numbers clearly.

How do I find the manufacture date of my engine?

Make sure your engine is turned “OFF” and has cooled sufficiently to allow handling. Locate the engraved serial number on the side of the crank case. The Date of Manufacture (DOM) indicator may be found within the engine’s serial number. Locate the first four digits (all numbers) of the serial number.

IT IS INTERESTING:  What's a bumper assembly?

What is code date on Briggs and Stratton?

The engine’s code number indicates the exact date it was manufactured. This system provides an easy way to determine the age of your small engine. The following is an example of interpreting date Code 99011556: The first two digits (99) denote the year of manufacture.

Car repair school