How much horsepower does a 454 stroker engine have?

How much horsepower does a 454 stroker engine have? In staying with the standard bore/stroke combination of 4.25/4 inches, however, it is not uncommon to yield power outputs of greater than 650 horsepower from the 454 in race engine configurations.

How much horsepower does a 454 stroker make?

Surprisingly, the 454 laid down an impressive 330 horsepower and 475 pound-feet of torque. Naturally, the truck-based 454s were tuned for torque, so having nearly 500 pound-feet wasn’t a big surprise.

How much HP does a 496 stroker have?

GM 496 Stroker Base Engine Aluminum Heads Roller Cam HP & Torque: 575 HP / 570 FT LBS.

How can I get more horsepower out of my 454?

How Do I Get More Power out of a Chevy 454?

  1. Improve the fuel and air intake system. The more fuel and air you are able to get into your Chevy big block engine, the more power it will be able to produce. …
  2. Replace the stock exhaust system with a high-flow system. …
  3. Replace the stock timing parts with ones tuned for racing.

How much HP does a 427 stroker have?

Best Use

IT IS INTERESTING:  Where are Honda car engines made?
Horsepower: 550
Torque: 525
Bore/Stroke: 4.030 x 4.170
Compression: 10:1
Fuel Type: Pump Gas, 93 AKI (USA) / 98 RON

How much horsepower can I get out of a 454?

In staying with the standard bore/stroke combination of 4.25/4 inches, however, it is not uncommon to yield power outputs of greater than 650 horsepower from the 454 in race engine configurations.

How much HP can a 454 block handle?

As for big block Chevy a factory 2 bolt 454/427/402 block with out large over bores will easily and safely handle 700+hp/torque, and never discount the cast cranks As I have seen 600-700 hp on cast cranks, they just dont like shock loading quite as much as sbc will take,,tend to have reliability issues.

Did Chevy make a 496?

GM code name was L18, a.k.a. the 8.1L, Vortec 8.1, Vortec 8100, or Vortec 496. Whatever you call it, call it awesome. … The L18 (496 in³/8.1 Liters) debuted in 2001. It was a long-stroke derivative of the 454 in³ engine (same bore) built in Tonawanda.

How do you turn a 454 into a 496?

Take a 454, add a 4.250-inch stroke crank along with some 6.385-inch rods and your displacement shoots up to 489 cubes. Now bore those cylinders out a touch, to say . 060-inch over and you end up with the venerable 496.

How much HP can a 4 bolt main 454 handle?

A two-bolt main, cast crank bottom end, properly machined and assembled would be good for at least 550-600 hp. 6-6300 rpm limit. 4 bolt mains and a steel crank can handle 700hp and 7200 rpm.

How much is a 454 big block worth?

It really depends on how much comes with the engine. If you don’t already have a big block then you need all the brackets for the alternator etc. Around here typical bare engines are in the $1000-$1500 range.

IT IS INTERESTING:  How do you check fan motor winding?
Car repair school