the 351w is a very good engine, it can handle a lot of power before the block splits, that usually happens at around 800hp. the 351m is an ok engine, good for use in trucks and for the basis of building a good 400. the 351c on the other hand is tough to beat, even by the chevy 350.
How long will a 351 Windsor last?
could go up to 300,000 miles if you never run it over 3000 rpm or it could last another 50 miles if you run it at say maybe 8000 rpm.
How much horsepower does a 351 Windsor have?
Ford 351W V-8 Specs
|Engine:||Ford 351W V-8 (5.8L)|
|Peak Horsepower:||• 1969 – 250 hp w/ 2 barrel carburetor, 300 hp @ 5,400 rpm w/ 4 barrel carburetor • 1972 (net power ratings adopted) – 153 hp w/ 2 barrel, 161 hp w/ 4 barrel • 1997 – 205 hp (CA version), 210 hp @ 3,600 rpm • Ford Lightning – 240 hp @ 4,200 rpm|
What year is the best 351 Windsor?
From what I have read, the best year for 351W blocks are 1969, 70, and 71. For some reason these were the strongest 351W ever produced, but very hard to find.
Is the 351 Windsor reliable?
Ford 351 Windsor Reliability
The blocks, even on the 1975+ models, are very stout and will not give any problems until serious power is added. The rods, pistons, and other internal components are rock solid as well. Overall, the 351 Windsor is a tough engine and is built to take a beating.
What engine is better 351 Cleveland and 351 Windsor?
The 351 Cleveland is a member of the 335 series family of Ford small-block engines. Its large ports and oversize canted valves give it more horsepower and allow it to run at a higher rpm than the Windsor. The valve covers have a twisting curve and are attached by eight bolts.
How many miles per gallon does a 351 Windsor get?
the 302 only gets about 15 mpg in city and the 351 gets about 12. they have about the same mpg but the 351 makes about 20 more hp but over an extra 100 pounds of torque. Nether of them can get many more mpg.
Is 302 better than 351W?
So for equal money, a 351 will have more cubes, more low end torque, and a lower RPM peak. A 302 will have the same HP, but a slightly higher tq peak with lower tq numbers. In almost any situation, cubes are better.
How can I get more horsepower out of my 351 Windsor?
The key to making more horsepower in the 351 Windsor, or any engine, is to move more gas/air mixture through the engine. That means improving the flow in the heads. You can use a myriad of performance tricks to achieve higher head-flow. The first one is making sure air isn’t being restricted as it enters the engine.
How much power can you get out of a 351 Windsor?
The long-lived Ford “Windsor” engine, displacing 351 cubic inches, was available in performance applications such as the Ford Boss Mustang in 1971, and today is available in a crate-engine version which features up to 535 horsepower.
Which 351W block is best?
pb_paulie_b. The 69′ block is the strongest stock 351w block. High nickle content and thicker main webbing. It is also flat at the top of the main webbing.
What is the best carburetor for a 351 Windsor?
The Best Carburetors for 351 Windsor Reviews
- Mophorn FORD0002YF — Carburetor Heavy Duty 2100 2 Barrel Carburettor.
- A-Team Performance Ford 2100,A800 — 154 2-BARREL CARBURETOR 2100.
- AutoHorizon AAUSME000320 — 2 Two Barrel Carburetor 2100 For Ford 351.
- AUXMART 70018229 — Carburetor New 2100.
- Two 2 Barrel Carburetor.
How much is a 351 Windsor engine worth?
As far as values it certainly depends on supply and demand but if the engine is in reasonably good rebuildable condition and an early example, I would think it worth somewhere between $300 and $450.
How much compression should a 351 Windsor have?
Ford 351 with a compression ratio of 8.3 = 125 to 166 psi.
Will 351 Windsor heads fit on a 351 Cleveland?
Member. 351C heads will not work on a 351W block without drilling new water jackets in the heads. A 351C intake will not work at all on a 351 W.