The number of turns indicates how much wire is wrapped inside the motor. … A higher turn number means more wire and thus more resistance, resulting in a slower motor. So turns with a lower number means a faster motor.
What does 12T mean on RC Motors?
A 12T double would use two wires wound twelve times and a 12T single a single thicker wire wound twelve times around each rotor pole. A low turn single will be best for HIGH RPM and a higher turn triple or quad have higher TORQUE over its RPM range.
What are turns on an electric motor?
Inside an electric motor, permanent magnets are set onto a ring surrounding a coil of wire. When the appliance’s switch is flicked on, electrons flow through the wire, turning it into an electromagnet. The attractive and repulsive forces of the permanent magnets around it make the electromagnet spin.
What does 12 turn motor mean?
A 12 turn motor will be tons faster and will drain a battery faster . Just as he said. a twelve turn motor will have more RPM, less torque, and draw more current. The number or turns refers toi the number of times the wire is warpped around your armature in the motor.
What does the T stand for on RC motors?
The “T” stands for turns. This is the number of times the wire inside the motor is wrapped around the stator. A smaller number of turns typically equals less resistance, and more power. A higher number typically means more resistance, and less power.
How can a motor spin fast?
One easy way to make the motor run faster is to add another magnet. Hold a magnet over the top of the motor while it is running. As you move the magnet closer to the spinning coil, one of two things will happen. Either the motor will stop, or it will run faster.
Does the motor rotate continuously when there is current?
Because the current flows in opposite directions in the wires, Fleming’s Left-Hand Rule tells us the two wires will move in opposite directions. … If the coil of wire could carry on moving like this, it would rotate continuously—and we’d be well on the way to making an electric motor.
How many turns is a 3300kv motor?
3300 is 13.5 equiv if it were a Novak motor.
How do you determine the RPM of a brushless motor?
To estimate the RPM of a motor, simply multiply the Kv value by the battery voltage. Kv is in units of RPM/Volt. The more torque a motor needs to produce, the more current it will draw.