Using oil that is thicker than recommended may lead to a decrease in fuel economy, a higher load on your engine, and even a shorter life for your engine. Conversely, using thinner, lighter-weight oil than recommended can cause excessive wear and shorter life.
Is Thicker oil bad for engine?
Not only that, but the engine will waste energy pumping the thicker motor oil, reducing fuel economy. Since thicker oils don’t transfer heat as well as thinner oils, operating temperatures will increase, too, possibly leading to accelerated chemical break down and harmful sludge and deposits.
What happens if I put 10w40 instead of 5w30?
If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.
Should I use thicker oil in an older engine?
A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil – 10W – can help protect worn engine bearings as well.
What does thicker oil do for your engine?
The number to the right of the dash is the viscosity rating at engine operating temperature. The higher the number, the thicker the oil. … Using motor oil that is too thin may cause durability issues, but using motor oil that is too thick may cause the engine to operate less efficiently.
Is 5w30 better than 10w40?
The difference is in the viscosity of each at different temperatures. … The 5w30 oil will flow better at low temperatures than the 10w40 oil. This means that the 5w30 oil will protect the engine better at low temperatures, usually when the engine is just starting or during weather conditions such as winter.
Is it OK to use 0w20 instead of 5w30?
0w-20 is simply a different viscosity of oil. It won’t be an advantage to your engine if your manufacturer suggests you use 5w-30 and may indeed be a detriment to your engine. 0w-20 may be a recommended oil for certain conditions for your engine and may not be recommended for your engine.
Can I put 10w40 in a 5w30 engine?
The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.
Is it bad to add oil without changing it?
Dark colored, cloudy or gritty textured oil is a sign the lubricating components of the oil have been exposed to heat for too long and needs to be changed. Adding oil instead of an oil change at this point could cause engine issues. This used oil needs to be removed to allow new oil to lubricate your engine’s parts.
Can I switch from 10w40 to 5w30?
If your handbook recommends SAE 5W-30 AND SAE 10W-40, then you can change by all means, but the only difference will be slightly worse fuel economy and slightly harder starting when cold.
What is the best oil for high mileage trucks?
5 Best Motor Oils for High Mileage Engines
- #1 – Mobile 1 High Mileage Synthetic Oil.
- #2 – Royal Purple HMX Synthetic Oil.
- #3 – Mobile Super High Mileage Synthetic Oil.
- #4 – Castrol GTX High Mileage Synthetic Blend Oil.
- #5 – Pennzoil High Mileage Synthetic Blend Motor Oil.
Which is better 10W40 or 20W50?
10W40 is not better than 20W50 for high mileage. The difference between 10w40 and 20w50 is simply that the latter is thicker. As far as gas mileage goes, no oil will improve your gas mileage by changing from 10W40 to 20W50 or vice versa.
Which oil is thicker 5w30 or 10w30?
10w30 is thicker than 5w30 because it has a higher viscosity in low temperatures. The engine oil will flow slower than 5w30 during the cold season. Thicker or higher viscosity metal oil has a better seal compared to low viscosity oil. Thicker oil offers better lubrication of motor and engine parts.